|
Forth-Gesellschaft e.V. |
Wir programmieren Forth |
|
|
Forth-Gesellschaft e.V. |
Wir programmieren Forth |
InfosWas ist Forth?Die Forth-Gesellschaft Mitglied werden Das Forth Magazin Forth-eV Wiki Mikrocontroller-Verleih Drachenpreis Forth Applikationen Forth im Internet Persönliche Kontakte KategorienNachrichten (71/0)
Mikrokontrollerverleih (4/0)
Forth Chat (4/0)
Archiv (299/0)
Schatztruhe (3/0)
Tagungen (19/0)
Whois? (6/0)
Support (7/0)
in site (2/0)
LaunchPad & 4e4th (10/0)
TermineEs stehen keine Termine an |
Willkommen bei Forth-Gesellschaft e.V.
Donnerstag, 28. November 2024 @ 13:57 CET Neu im Verleih: TI MSP430FR5739 Experimentierboard mit FRAM
Autor: cas am
Dienstag, 08. Mai 2012 @ 09:09 CEST
Das FRAM Camel Forth unter Linux schreiben:
# sudo /usr/local/bin/mspdebug rf2500 "load CF430FRexp.a43" MSPDebug version 0.19 - debugging tool for MSP430 MCUs Copyright (C) 2009-2012 Daniel Beer This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Trying to open interface 1 on 012 Initializing FET... FET protocol version is 30328680 Configured for Spy-Bi-Wire Set Vcc: 3000 mV Device ID: 0x0381 Code start address: 0xc200 Code size : 15872 byte = 15 kb RAM start address: 0x1c00 RAM end address: 0x1fff RAM size : 1024 byte = 1 kb Device: MSP430FR5739 Code memory starts at 0xc200 Number of breakpoints: 3 Writing 118 bytes to 1800... Writing 4096 bytes to c200... Writing 2382 bytes to d200... Writing 128 bytes to ff80... Done, 6724 bytes written |
| Copyright © 2024 Forth-Gesellschaft e.V. All trademarks and copyrights on this page are owned by their respective owners. |
Powered By Geeklog Seite erzeugt in 0,03 Sekunden |
![[XML]](/images/icons/xml.gif){kind=icon}